Datasheet


Manual


Ürün Tanıtımı
Ürün Özellikleri
Teknik Özellikleri
Aksesuarlar
Ürün Tanıtımı

MI 3108 EurotestPV is a combined photovoltaic tester and electrical installations safety tester. It enables complete testing of electrical installations according to EN 61557 standards and in addition performs all necessary tests required on single-phase photovoltaic (PV) installations. This includes all of the tests as required by EN 62446, but also includes I – U characteristic, Calculation of STC values and power measurements on Inverter’s DC and AC sides. The unit is designed for the demanding working conditions (up to 1000 V, with 15 A DC). To greatly improve user safety the MI 3108 EurotestPV comes with the PV Safety Probe which ensures safe disconnection every time.

MEASURING FUNCTIONS

Photovoltaic installations:

Measurements on DC side of PV installation:

• Voltage, current, power;
• Uoc (Open Circuit Voltage) and Isc (Short Circuit Current);
• I – U curve of PV modules and strings;
• Irradiance;
• Module temperature.

Measurements on AC side of PV installation (power quality):

• Voltage, current, frequency, power, PF, energy, harmonics;
• Efficiency of PV module, inverter, PV system calculation.

Electrical installations:

• Insulation resistance;
• Continuity of PE conductors;
• Line impedance;
• Loop impedance (sub-functions with high current and without RCD tripping);
• RCD testing (type AC, A and B);
• Earth resistance;
• AC current (load and leakage);
• TRMS voltage, frequency, phase sequence;
• Power, energy, harmonics.

Ürün Özellikleri

Photovoltaic installations:

• Calculation of STC values;
• Efficiency calculations;
• Graphical representation of module’s I – U curve;
• 2 voltage & 2 current channels for simultaneous AC & DC parameters measurements;
• Optional PV Remote Unit for simultaneous measurements of solar irradiation and temperature of PV module.

Electrical installations:

• Automated RCD testing procedure;
• Support for B type RCD;
• Earth resistance measurement;
• Built-in fuse tables for automatic evaluation of the line / loop impedance results;
• Online monitoring of all 3 voltages;
• Scope function;
• Loop impedance test without tripping the RCD;
• 1-phase power and energy measurements (including harmonics up to 11th).

Teknik Özellikleri

FOTOVOLTAİK TESİSAT ÖLÇÜMLERİ

ELEKTRİK TESİSAT ÖLÇÜMLERİ

Aksesuarlar