Manual
Ürün Tanıtımı
Ürün Özellikleri
Teknik Özellikler
Uygulamaları
Ürün Tanıtımı
EKO’s new generation sensors broke the rules of traditional pyranometer architecture. The innovative patented design was inspired by the combination of latest technologies and state-of-the-art thermopile sensor, enabling a breakthrough in unprecedented low zero-offset behavior and fast sensor response.
The compact sensor with a single dome, based on an isolated thermopile detector and Quartz diffusor is immune to offsets and integrates all optional value-added functions such as a ventilator, heater and different industrial interfaces. The heater and ventilator are suggested, particularly in areas impacted by dew, frost, snow, and dust.
The MS-80 pyranometers are manufactured in a consistent way followed by strict quality inspection and performance evaluation. For each sensor, the directional response and temperature dependency are measured and validated through a measurement report that comes with the sensor. EKO provides a unique calibration compliant to the international standards defined by ISO/IEC17025/9847.
The MS-80A is a MS-80 with built in 4-20mA converter, which is compatible to the industrial output standards. Due to the ultra-low temperature dependency and exceptional non-linearity characteristics, the converter guarantees an optimal sensor performance, under any environmental conditions.
The MS-80M is a MS-80 with built in MODBUS RTU 485 converter, which is compatible to the industrial output standards. Due to the ultra-low temperature dependency and exceptional non-linearity characteristics, the converter guarantees an optimal sensor performance, under any environmental conditions.
Ürün Özellikleri
- ISO 9060 Secondary standard
- Fastest detector response
- Quartz diffusor technology
- ISO 17025 certified calibration
- 5 years warranty and recommended recalibration
Teknik Özellikler
| MS- 80 | MS- 80A | MS- 80M | |
| ISO 9060 sınıflandırma | Secondary Standard | Secondary Standard | Secondary Standard |
| Çıkış | Analog (mV) | Digital (4-20mA) | Digital (Modbus RTU) |
| Tepki süresi 95% | < 0.5 Sec. | < 1.5 Sec. | < 1 Sec. |
| Hassas ayar (Zero Offset) A 200W/m² | < 1 W/m² | < 1 W/m² | < 1 W/m² |
| Hassas ayar (Zero Offset) B 5K/hr | +/- 1 W/m² | +/- 1 W/m² | +/- 1 W/m² |
| Non-stabilite (değişme / yıl) | – | – | – |
| Non-stabilite (değişme / 5 yıl) | +/- 0.5 % | +/- 0.5 % | +/- 0.5 % |
| Non-linerite (1000W/m2 ) | +/- 0.2 % | +/- 0.2 % | +/- 0.2 % |
| Yönsel tepki (1000W/m2 ) | < 10 W/m² | < 10 W/m² | < 10 W/m² |
| Spektral seçicilik 0.35-1.5µm | +/- 3 % | +/- 3 % | +/- 3 % |
| Sıcaklık tepkisi -10°C to 40°C | < 0.8 % | < 0.4 % | < 0.4 % |
| Temperature response -20°C to 50°C | < 1 % | < 0.5 % | < 0.5 % |
| Tilt tepkisi 1000W/m² | +/- 0.2 % | +/- 0.2 % | +/- 0.2 % |
| Çalışma sıcaklığı aralığı | -40 – 80 °C | -40 – 80 °C | -40 – 80 °C |
| Işınım aralığı | 0 – 4000 W/m² | 0 – 4000 W/m² | 0 – 4000 W/m² |
| Dalgaboyu aralığı | 285 – 3000 nm | 285 – 3000 nm | 285 – 3000 nm |
| (Ingress protection IP) | 67 | 67 | 67 |
| Kablo uzunluğu | 10 m | 10 m | 10 m |
Uygulamaları
- Accurate solar radiation measurements
- Solar Radiation Measurements in PV applications
- DHI Measurements
- Solar radiation energy budgets studies
- PV Site Solar monitoring
- PV Modules performance assessment